Clark Rubber Super Grab Adhesive Spray for Foam is a fast, effective contact adhesive designed for convenient application and long-lasting results. Supplied in a 500ml aerosol can, this low-odour, clear adhesive provides a strong, instant bond when two treated surfaces are pressed together. It offers excellent high-temperature resistance and is waterproof once cured, making it ideal for both light commercial and general use. The formulation is designed for bonding foam, fabric, and acoustic panels to MDF, plywood, brick, concrete, and plaster, making it a versatile choice across a range of projects.
Key Features:
• Strong, instant bond under pressure
• Low odour and clear finish
• Waterproof and fast drying
• High temperature resistance for durability
• Convenient aerosol spray application
• Suitable for foam, fabric, and acoustic materials
• Bonds to MDF, plywood, brick, concrete, and plaster
• Supplied in 500ml can
Best Used For:
• Bonding foam to various substrates
• Upholstery and fabric applications
• Acoustic panel installation
• Workshop and general repairs
• Craft and DIY projects
• Interior fit-outs and insulation work
Technical Specifications:
• Type: Contact spray adhesive
• Finish: Clear
• Volume: 500ml aerosol can
• Temperature Range (Optimal use): 16°C–27°C
• Tack Time: Leave 1–2 minutes before bonding
• Coverage: 80%–100% of both surfaces for best results
• Waterproof: Yes
• Odour: Low
DIRECTIONS FOR USE: Read and understand the Safety Data Sheet (SDS) before use and use appropriate Personal Protective Equipment (PPE). This product is designed to be applied to both surfaces to be bonded. Make sure that surfaces are clean, dry and free from dirt, dust, oil, loose paint, wax or grease, etc. Shake the aerosol well before use. Always test on your chosen surfaces before use. Apply an even coat of adhesive to obtain 80% to 100% coverage of both surfaces. Spray one surface vertically and the other surface horizontally. If necessary, spray another coat of adhesive in areas that appear to need more adhesive. Leave surfaces for 1 to 2 minutes to allow the adhesive to tack off. Press surfaces together with adequate pressure.
Note: No repositioning is possible once the pressure is applied. For best results keep adhesive and surfaces between 16°C-27°C
