You’ve seen it on TV, and now it’s available at Clark Rubber!
Introducing FLEX SEAL™, the rubberised sealant spray coating that sprays out as a liquid, seeps into cracks and holes and dries to a watertight, flexible coating. It’s the easy way to coat, seal, and stop leaks fast. It's like a handyman in a can!
Easy-to-use, portable, aerosol spray
Sprays out as a liquid and dries as a strong, rubberised coating
Stays flexible and pliable
Won’t sag or drip in the summer heat
Doesn’t crack or peel in the winter cold
Stops vibrations and deadens noise
Protects surfaces from corrosion
Can be used on wet or dry surfaces
Once completely dry, it can be painted any colour
Available in three 2 colours (Black & Clear)
Can capacity: 396 gm
FLEX SEAL™ has many advantageous applications and uses, that when applied correctly, can last for many years. The most common uses for Flex Seal are listed below:
Common FLEX SEAL™ Applications:
Fix leaky roofs, gutters, and down pipes, Repair caravans and mobile homes, Repair skylights, Vent Pipes and flashings, Leaky or broken hose and PVC pipe repairs, To seal or repair windowsills, For A/C drip pans, duct work, and chimneys, On boats and other personal watercraft, For bird baths, ponds, and fountains, Roof repairs and leaks, And, much more!
Wood, Metal, Tile, Concrete, Masonry, Fabric, Glass, Plastic, Aluminium, Porcelain, Plaster, Rubber, Cement, Some vinyls and so much more!
*FLEX SEAL™ may not be compatible with all plastics, vinyls, or rubbers.
HOW TO USE
Always read and follow the instructions for use. For full usage instructions and safety directions, Read Can.
Read entire can. Wear face and eye protection, protective gloves, and clothing.
Make sure the surface is clean, dry, and free of grease, oil, and dirt.
Spray 20cm to 30cm away from surface, using an even, sweeping motion.
Apply multiple, even coats until ALL cracks and holes have been filled.
Each coat must be dry before applying additional coats.
IMPORTANT: Allow 24 to 48 hours to dry before applying another coat.
Let it dry completely. (It usually takes up to 24 to 48 hours to fully cure.)
*Use FLEX SEAL™ ONLY in a well-ventilated area. When using inside, prevent vapour build-up by opening doors and windows.
**Ensure fresh air entry during application and drying.
***Do not use near heat, sparks, pilot lights or other sources of ignition.